From parameters to a finished cut list.

Carcassist is a free planner for cabinets and furniture carcasses that runs entirely in your browser. Configure a carcass through parameters, see it instantly in 3D and generate every document for cutting and the workshop.

Every part, exactly to size.

• Dimensions, panel thickness and material freely configurable — even per part.
• Construction: continuous sides or a continuous top/bottom.
• Joinery: dowels, Domino, Lamello, screws or groove — with drilling pattern.
• Top as a full panel or as rails (flat or upright) for base cabinets.
• Back panel grooved (inset or slid in from below) or surface-mounted.

Open, doors or drawers — per compartment.

• Open, doors or drawers — different for each compartment.
• Overlay or inset doors, with hinge-cup boreholes.
• Drawers with individually defined heights, runner clearance and front material.
• Drawer bottom in the groove (all-round or slid in from the back) or underset.

Split the carcass, place the hole rows.

• Split center wall (vertical) or divider shelf (horizontal) → two independently configurable compartments.
• Adjustable shelves with shelf-support boreholes.
• LR32 / System-32 hole rows for the sides.

• Parts list with dimensions, grain direction and edges.
• Cut list / saw plan with offcut optimization and cutting sequence.
• Material & cost list, hardware & machining list.
• Scaled technical drawings incl. dimensioning of holes and grooves.
• Plinth and worktop per carcass.
• Export as CSV; save and load projects as JSON.
• Multilingual (German/English), light and dark theme.

Ready to plan your carcass?

No download, no account. Open the planner, configure — and take parts lists, the saw plan and drawings straight to the workshop.